KPT - 14

- Size: 2-1/2” x 2-1/2” x 2-1/2”
- Symmetrical to the Center of Vee's within .0001"
- Unique Clamp Permits V-Block to be Used on All Sides
- Rigid and Accurate Clamping
- Stable Setups with Small Footprint
- Low Slots Help Small Parts


 KTP-14
Close X

KPT - 15

- Size: 2” x 2-1/2” x 3-1/2”
- Symmetrical to the Center of Vee's within .0001"
- Sides are Ground Parallel and the Vees are Ground
Central, Square and Parallel to the Sides and
the Base within .0001.
- Clamp are Machined not Forged. Included

-Used for Cylindrical Work and Also Provides a Fast Setup
for Grinding.
-It Can Be Used on the Base, on the End or on Either Side.
- The Clamp is smaller than the Outside Width of the Block.


 KTP-15
Close X

KPT - 16

- Size: 1-3/4 x 1-3/4 x 1-3/4”
- Symmetrical to Center of Vee Within .0002"
- Clamp Included

-Designed for the Most Accurate Toolroom and Layout Work. 
-Firmly Holds Round Stock During Machining and Grinding Operations.
-Side Slots Allow Easy Mounting to Work Surface.


 KTP-14
Close X

KPT - 18

- Size: 1-3/4” x 2-3/8” x 3”
- Symmetrical to Center of Vee  Within .0002”
- Parallel and Square on All Surfaces to .0001”
- Clamp Included


KTP-14
Close X
About Us
Home Page Contact Us Terms
 
• Precision Vises
• Precision V-Blocks
• Precision Angle Plates
• Set-Up Tools
• Height Gages & Stands
• Shop Accessories &
  EDM Tools
KPT-14
Credit Cards

 
 
Precision V-BLOCKS
Versatile Tools for Grinding, Milling, EDM, Drilling and Inspection
Made of Steel --- Hardened to RC 58 - 62
Flat, Parallel and Square on All Surfaces within .0001”
Click on the
picture
for more information and larger
image
KPT-13 KPT-14 KPT-15 KPT-16 KPT-18
V-Block and Clamp
Integral Unit

KPT - 13

- Size: 2-1/2” x 2-1/2” x 2-1/2”
- Each V-Block Can Lie Down on 5 Sides.

- A Super Precision V-Block for Use in Close Tolerance Work. 
- Clamp Has Two Guide Pins To Provide Parallel Movements
Up and Down.

KTP-13
Close X
V-Block and Clamp V-Block and Clamp V-Block and Clamp V-Block and Clamp
Item # :  KPT-13 KPT- 14 KPT- 15 KPT- 16 KPT- 18
Height: 2-1/2” 2-1/2” 2" 1 - 3/4" 1 - 3/4"
Width: 2-1/2” 2-1/2” 2-1/2" 1 - 3/4" 2 - 3/8"
Length: 2-1/2” 2-1/2” 3 - 1/2 " 1 - 3/4" 3"
Holes:
2 (1/4-20)
2 (1/4-20)
1 (10-32)
6 (1/4-20)
4 (1/4-20)
V-Capacity: 1" 1" 1-1/2" 2-5/16" 1-1/2 DIA
Price: 
$445.00
$495.00
$155.00
$110.00
$190.00
 
• Precision Vises • Precision V-Blocks • Precision Angle Plates • Set-Up Tools • Height Gages & Stands • Shop Accessories & EDM Tools
Copyright © Krav Precision Tool Corporation. All Rights Reserved